Regviz

NXP Semiconductors /LPC111x_LPC11Cxx /IOCON /IOCON_PIO2_11

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as IOCON_PIO2_11

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/NXP Semiconductors/LPC111x_LPC11Cxx/IOCON/IOCON_PIO2_11#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (SELECTS_FUNCTION_PIO)FUNC0 (INACTIVE_NO_PULL_DO)MODE 0 (DISABLE_)HYS 0RESERVED 0 (STANDARD_GPIO_OUTPUT)OD 0RESERVED

HYS=DISABLE_, MODE=INACTIVE_NO_PULL_DO, OD=STANDARD_GPIO_OUTPUT, FUNC=SELECTS_FUNCTION_PIO

Description

I/O configuration for pin PIO2_11/SCK0/ CT32B0_CAP1

Fields

FUNC

Selects pin function. All other values are reserved.

0 (SELECTS_FUNCTION_PIO): Selects function PIO2_11.

1 (SELECT_FUNCTION_SCK0): Select function SCK0 (only if pin PIO2_11/SCK0 selected in Table 147).

2 (SELECT_FUNCTION_CT32): Select function CT32B0_CAP1.
MODE

Selects function mode (on-chip pull-up/pull-down resistor control).

0 (INACTIVE_NO_PULL_DO): Inactive (no pull-down/pull-up resistor enabled).

1 (PULL_DOWN_RESISTOR_E): Pull-down resistor enabled.

2 (PULL_UP_RESISTOR_ENA): Pull-up resistor enabled.

3 (REPEATER_MODE_): Repeater mode.
HYS

Hysteresis.

0 (DISABLE_): Disable.

1 (ENABLE_): Enable.
RESERVED

Reserved
OD

Selects pseudo open-drain mode.

0 (STANDARD_GPIO_OUTPUT): Standard GPIO output

1 (OPEN_DRAIN_OUTPUT): Open-drain output
RESERVED

Reserved

Links

()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data